Your design is saved!
You can continue your configuration at any time.
Choose wall panels
On the left you can find four general shapes, choose the shape that best resembles your kitchen wall. After you select one it is possible to alter the size and to mirror the shape.
Backsplashes have a maximum size per panel:
If you want to configure multiple wall panels, because your kitchen counter top has a corner for instance, you can easily add additional wall panels.
Tip: work from left to right. Make your left wall panel one in the configurator. When you're all done configurating you can see your result in the right order.
Have you added all your panels? Proceed to the next step.
Are there any wall outlets that we need to take into account? You can place cutouts in this phase of the configuration.
Click 'add cutout +' and choose the general shape. To achieve a perfect fit, it is important to measure your wall outlet and it's location on the wall precisely. Remove the coverplate of your wall outlets to expose what's underneath. Measure your wall outlet between the metal edges that should now be visible.
To determine the location of the wall outlet on the wall, measure from the outer edges of the wall towards the the same metal edges of the outlet.
Repeat this proces for all wall outlets in all panels. In the top of the screen you can see which wall panel you are configuring at the moment.
You can start the design proces, all wall panels are ready. On the left side of your screen you can find our collection of photos or you can upload your own!
Do you want one single picture to cover all your wall panels, click 'use one picture' at the top of your screen. If you want a different picture per wall panel, click 'design seperately'.
If you have your own photo, keep in mind that the image should be of a minimal size to get a good result. We use a minimum of 3350 pixels per 100 cm. If you doubt that you image has enough pixels, don't worry! We always check before we proceed with production. For free!
If things don't go according to plan, click save and then contact us. We will help you out!
This is your final result, be sure to check everything. You can now save your design to continue later or proceed to ordering. To make sure all is well, we will also check your design before we proceed to production.
Not a 100% content with your design but only 99 or less? Contact us, we can help you! You can still do this after you order, no worries.
For all our products, you can choose wether you want a gloss or matte finish. Please sent us after ordering an email with your choice and order number.
Choose your finish
Do you want to continue with a previously made wall panel?
You can find your earlier made designs in your account.